City of San Luis Obispo, CA
Home MenuIntersections and Crossing
Protected Intersections
A protected intersection is a type of intersection that uses a number of design elements to increase safety for bicycling, walking, and driving. For bicycling, it provides a more comfortable way to make left turns without having to merge across several lanes of motor vehicle traffic. It also features wider sidewalk corner curbs with a corner island that helps safely reduce the crossing distance to walk across a street while also reducing vehicular speeding around corners.
Click here to watch a short video about protected intersections.
Roundabout
A roundabout is an intersection where traffic moves around a central island counterclockwise. Vehicles entering or exiting must yield to others. Roundabouts have advantages over traffic signals, including traffic calming, lower maintenance costs, reduced emissions, pedestrian safety, and landscaping opportunities.
Take a look at the City's Roundabout Fact Sheet for additional information!
Also, check out these user videos to see how simple it is to navigate a roundabout as a driver, bicyclist and pedestrian.
Remember, roundabouts are different than a neighborhood traffic circle. Take a look at this flyer to read about the key differences.
Pedestrian Hybrid Beacon
A pedestrian hybrid beacon (PHB) is used to improve unsignalized intersections or midblock crossings of major streets. It consists of a signal head with two red lenses over a single yellow lens on the major street, and a pedestrian signal head for the crosswalk. The signal is only activated when a pedestrian and/or bicyclist is present, resulting in minimal delay for motor vehicle traffic.
To learn more please see the following videos:
Introduction to Pedestrian Hybrid Beacon
How to use a Pedestrian Hybrid Beacon as a Pedestrian or by Bike
How to use a Pedestrian Hybrid Beacon as a Driver
Rectangular Rapid Flashing Beacons (RRFB)
Rectangular Rapid Flashing Beacons (RRFBs) are installed at crosswalks to increase bicycle and pedestrian visibility. RRFBs are often placed at school crossings and locations with high crossing demand.
RRFBs consist of two rectangular yellow light bars, which flash in a vibrant strobe pattern when the push button is pressed. The activation of the RRFB alerts approaching drivers that there is someone using the crosswalk.
How to use an RRFB
- 1. Press button to activate warning lights
- 2. Look both ways
- 3. Proceed through crosswalk when clear
- 1. Press button to activate warning lights
- 2. Look both ways
- 3. Proceed through crosswalk when clear
- Important: vehicles are not required to yield unless you dismount your bicycle and use the crosswalk as a pedestrian
- 1. Yield to pedestrians at crosswalk
- 2. Proceed through intersection when clear
Pedestrians
Bicyclists
Drivers
To learn more click here.
FAQ Box
-
Can I ride my bike on sidewalks in the City?
-
Will my bicycle be detected at a traffic signal?
-
Are there bicycle education opportunities within San Luis Obispo?
-
What is a bike box?
-
Can I bring my bike on the bus?
-
Can people riding a bike be in the vehicle lane or do they have to move to the right?
-
What does a green bike lane mean?
-
What is a Sharrow?
-
What is the small bicycle symbol in the traffic lane at a signalized intersection?
-
Where can I park my bike?
